shafi_banner

samfurori

Gun laer waldi na hannu SUP 20S

Takaitaccen Bayani:

Suna: Sunan samfur: Shugaban waldawar Laser na hannu
Samfura: SUP 20S
Lens Mai Kariya: D18*2
Mayar da hankali ruwan tabarau:D20*4.5F150
Lens Mai Haɗawa:D20*5F60
Mai Tunani: 30*14 T2
Zoben Wuta:18.5*21*1.7
Abun rufewa:18.5*20*5*1.7
Nauyi: 0.8KG


Cikakken Bayani

Tags samfurin

gunkin walda na hannu SUP 20S,
,

Tsaro - Tsaro
Tsarin gano aminci na ɓullo da kai tare da saitin ƙararrawa da yawa, mai aminci da kwanciyar hankali

Ajiye lokaci - inganci da dacewa
Mayar da hankali da madubi mai karewa, mai sauƙin maye gurbin

Mai nauyi -- mai sauƙi kuma mai ƙarancin nauyi
Ƙananan girman, nauyi mai sauƙi, aiki mai sassauƙa, mai sauƙin amfani

Quality – kyau waldi barga yi
Babban ƙarfin walda, ƙananan nakasawa, zurfin narkewa

Ayyuka - ayyuka da yawa
Goyan bayan walƙiya mai ci gaba da hannu, walda tabo, tsaftacewa, yanke, “hannu” “daga” - jiki, izinin kalmar sirri

Mun himmatu ga tsauraran ingancin kulawa da sabis na abokin ciniki, kuma ƙwararrun ma'aikatanmu za su tattauna abubuwan da kuke buƙata tare da ku a kowane lokaci.Ainihin ƙarfin samar da kamfanin na shekara-shekara ya zarce raka'a 20,000, kuma matsakaicin ƙarfin samarwa na shekara zai iya kaiwa fiye da raka'a 30,000.Kayayyakinmu suna sayar da kyau a duk birane da larduna a ko'ina cikin kasar Sin, kuma ana fitar da su ga abokan ciniki a cikin Tarayyar Turai da sauran ƙasashe da yankuna.
A lokaci guda, muna kuma maraba da OEM da ODM umarni.Da fatan za mu iya zama abokan tarayya na kurkusa da na dogon lokaci!

1) Tabbatar da ingantaccen ƙasa kafin samar da wutar lantarki.
2) The Laser fitarwa shugaban an haɗa zuwa solder shugaban.Da fatan za a duba kan fitarwa na Laser a hankali don hana ƙura ko wasu gurɓata lokacin amfani.Lokacin tsaftace kan fitarwa na Laser, da fatan za a yi amfani da takarda ruwan tabarau na musamman.
3) Idan ba a yi amfani da kayan aiki daidai da hanyar da aka ƙayyade a cikin wannan jagorar ba, zai iya lalacewa ta hanyar barin kayan aiki a cikin yanayin aiki mara kyau.
4) Lokacin maye gurbin ruwan tabarau mai kariya, da fatan za a kula da kariya.
5) Da fatan za a lura: Lokacin amfani da na'urar a karon farko, lokacin da ba za a iya fitar da hasken ja daga tashar tagulla ba, da fatan za a yi hattara don kada ya haskaka.

Cikakkun bayanan isar da kai na walda ta hannun hannu
★Labari na farko
SUP20S waldi shugaban 1pc
Tsarin tsari 1
Tsarin kebul na tsarin 10m

★Labari na biyu
Bututun ƙarfe 7pcs Yankan bututun ƙarfe 1pc
Sikelin tube 1 pc
Madubin kariya 10pcs
Tsarin ƙasa 1pc
Kebul na haɗin allo 1m
Nuna hitch 1 saitin

★Labari na uku
Nuni allon 1pcs
Canjin wutar lantarki 2pcs

Ma'anar wayoyi masu sarrafawa

sup-20s (3)

Mai kula da tashar samar da wutar lantarki

Wutar wutar lantarki na amfani da mai haɗin 5P kuma ana yin amfani da shi ta amfani da wutar lantarki mai sauyawa 24V da 15V mai sauyawa da aka bayar.
Lura cewa wutar lantarki ta 15V tana bambanta tsakanin tabbatacce da korau, V1 yana haɗa zuwa 15V+, V2 yana haɗa zuwa 15V-, kuma duk wani COM akan wutar lantarki na 15V yana haɗa da fil 2 GND!
Lura cewa wutar lantarki mai sauyawa dole ne ta kasance ƙasa!

Mai Kula da LCD24/5000

Ana isar da kebul na LCD tare da na'urar kuma ana iya haɗa shi kai tsaye.Dubi hoton da ke sama don takamaiman ma'anar

Mai sarrafa sigina 1

①/②Pin shine shigar da siginar ƙararrawar iska, idan kuna buƙatar kunna (wayoyin da ake buƙata), da fatan za a saita matakin ƙararrawar iska a bango kamar babba, in ba haka ba yana da ƙasa.
Pin ③/④ shine shigar da siginar ƙararrawar tankin ruwa.Idan kana buƙatar kunna shi (wayoyin da ake buƙata), saita matakin ƙararrawar iska zuwa sama a bango, in ba haka ba yana da ƙasa.
Fitin lamba shine ƙasan tunani don kulle ƙasa mai aminci kuma an haɗa shi kai tsaye zuwa kayan aikin aiki.
fil ɗin lamba shine maƙallan ƙasa na aminci don shugaban walda, wanda aka haɗa da shuɗin waya na waya mai mahimmanci uku, lokacin da shugaban weld ɗin ya taɓa kayan aikin, kulle amincin yana kunne a wannan lokacin.
Pin No. shine maɓallin kunnawa/kashe shugaban walda, wanda aka haɗa da launin ruwan waya na igiyar cibiya uku.
Pin No. shine maɓallin haske don shugaban walda, wanda aka haɗa da baƙar fata na waya mai mahimmanci uku, lokacin da aka ja abin kunnawa, maɓallin faɗakarwa yana haskakawa.
Lura cewa za a aika siginar fitarwa na tashoshin jiragen ruwa na gaba kawai idan babu ƙararrawa kuma siginar kulle aminci da maɓallin kunnawa suna kunne.
Mai sarrafa sigina 2
Ƙarshen siginar 2 na siginar yana amfani da ƙirar 6P, da layin da ke shigowa da ke da alaƙa da bawul ɗin iska
① Ƙafafun da aka tanada
② fil ɗin da aka tanada (wanda aka daidaita tare da siginar 4-pin)
③/④ fil shine fitarwa na 24V na bawul ɗin iska, wanda aka haɗa da bawul ɗin iska
⑤/⑥ ƙafa shine siginar siginar mai ba da waya, wanda shine tashar tashar siginar mai ba da waya, kuma ba a raba shi zuwa tabbatacce da korau.

Jadawalin wayoyi masu sarrafawa

①/②Pin shine shigar da siginar ƙararrawar iska, idan kuna buƙatar kunna (wayoyin da ake buƙata), da fatan za a saita matakin ƙararrawar iska a bango kamar babba, in ba haka ba yana da ƙasa.
Pin ③/④ shine shigar da siginar ƙararrawar tankin ruwa.Idan kana buƙatar kunna shi (wayoyin da ake buƙata), saita matakin ƙararrawar iska zuwa sama a bango, in ba haka ba yana da ƙasa.
Fitin lamba shine ƙasan tunani don kulle ƙasa mai aminci kuma an haɗa shi kai tsaye zuwa kayan aikin aiki.
fil ɗin lamba shine maƙallan ƙasa na aminci don shugaban walda, wanda aka haɗa da shuɗin waya na waya mai mahimmanci uku, lokacin da shugaban weld ɗin ya taɓa kayan aikin, kulle amincin yana kunne a wannan lokacin.
Pin No. shine maɓallin kunnawa/kashe shugaban walda, wanda aka haɗa da launin ruwan waya na igiyar cibiya uku.
Pin No. shine maɓallin haske don shugaban walda, wanda aka haɗa da baƙar fata na waya mai mahimmanci uku, lokacin da aka ja abin kunnawa, maɓallin faɗakarwa yana haskakawa.
Lura cewa za a aika siginar fitarwa na tashoshin jiragen ruwa na gaba kawai idan babu ƙararrawa kuma siginar kulle aminci da maɓallin kunnawa suna kunne.
Mai sarrafa sigina 2
Ƙarshen siginar 2 na siginar yana amfani da ƙirar 6P, da layin da ke shigowa da ke da alaƙa da bawul ɗin iska
① Ƙafafun da aka tanada
② fil ɗin da aka tanada (wanda aka daidaita tare da siginar 4-pin)
③/④ fil shine fitarwa na 24V na bawul ɗin iska, wanda aka haɗa da bawul ɗin iska
⑤/⑥ ƙafa shine siginar siginar mai ba da waya, wanda shine tashar tashar siginar mai ba da waya, kuma ba a raba shi zuwa tabbatacce da korau.

Mai sarrafa sigina 3

Pin shine shigarwar siginar ƙararrawa ta Laser +, idan kuna son kunnawa, da fatan za a saita matakin ƙararrawar iska zuwa babban matakin a bango.
Pin yana kunna +, haɗa ikon laser +.
Pin No. 3 shine fitarwa na 24V, fitarwa 24V+ kai tsaye bayan kunnawa
Fil No. ④ wuri ne gama gari (ƙas ɗin nuni na fil 1/2/3/5)
Fin No. shine analog + fitarwa, ana ba da analog
Pin No. shine siginar daidaitawa ta PWM
fil ɗin dijital shine siginar daidaitawa PWM+ ⑦ fil ɗin dijital shine siginar daidaitawa PWM+

Jadawalin wayoyi masu sarrafawa

sup-20s (4)

Lura: Matsakaicin COM na ± 15V mai sauyawa da wutar lantarki da kuma -V (0V) tashar wutar lantarki + 24V dole ne a haɗa shi zuwa GND kuma an haɗa shi gaba ɗaya zuwa kayan aiki a lokaci guda.Dole ne a haɗa yanayin wutar lantarki mai sauyawa zuwa ƙasa, in ba haka ba wani ƙararrawa na kulle kulle na iya faruwa kuma ba zai haskaka ba.

Ingantacciyar hanyar shigar da gani

SUP walda shugabannin suna samuwa ga mafi masana'antu Laser janareta.Abubuwan da aka fi amfani da su na fiber optic sune IPG, RICO, Troncin, FIBO, Tottenham, Jephte, Caplin, da dai sauransu. Dole ne a kiyaye na'urorin mai tsabta kuma a share duk kura kafin amfani.
Lokacin shigar da fiber ɗin, dole ne a jujjuya kan yankan digiri 90 don ya kasance a kwance kafin amfani da fiber ɗin don hana ƙura daga faɗuwa cikin mahaɗin.

Garkuwar iskar gas da ruwan sanyi

Ana iya shigar da bututun ruwa da gas tare da diamita na waje na 6MM da bututun diamita na ciki 4MM.Layin iskar gas yana shiga daga tsakiya, kuma bututun shigar ruwa da bututun ruwa suna daga bangarorin biyu (ba tare da la'akari da hanyar shigar da ruwa ba), kamar yadda aka nuna a kasa.

sup-20s (5)

Ana rarraba tsarin sanyaya zuwa ɓangaren da'ira na ruwa na shugaban walda da ɓangaren da'ira na ruwa na shugaban fiber na gani, waɗanda aka haɗa su a jere, kamar yadda aka nuna a cikin hoton da ke ƙasa:

sup-20s (6)

Bindigan walda da haɗin haɗin akwatin sarrafawa

Connection dubawa na waldi gun da iko akwatin
An haɗa bindigar walda zuwa akwatin sarrafawa tare da wayoyi guda uku, gami da: waya mai ƙarfin wutar lantarki guda biyu, waya siginar siginar guda biyar, kulle ƙasa mai aminci mai mahimmanci uku da maɓallin maɓallin kunnawa.

Wutar wutar lantarki / siginar siginar (wayoyin baƙar fata guda biyu) suna haɗa kai tsaye zuwa ɓangaren motar na shugaban walda kuma za'a iya cire su (zaɓi biyu: 1. Buɗe murfin motar da gefen gefen fitilar na hannu 2. Buɗe akwatin sarrafawa duka biyun. an toshe)
Makullin aminci da maɓallin faɗakarwa waya uku-core da aka yi amfani da filogin jirgin sama mai cirewa: kullewar aminci da waya maɓalli, wanda 1 shuɗi ne, 2 baƙi ne, 3 launin ruwan kasa (haɗe da siginar siginar 1 pin 6/7/8, duba ma'anar wayoyi na akwatin sarrafawa a sama).

Shigarwa mai ciyar da waya

Filogin jirgin sama mai mahimmanci guda biyu a ƙarshen mai ba da waya yana haɗa zuwa fil 5/6 na siginar siginar 2. Da fatan za a koma zuwa ga takamaiman hanyar shigarwa.

Danna.Umarnin shigarwa mai ciyar da waya (Applets).

Control panel da jagorar aiki (V3.3 version a kasa).

Takaitaccen aiki da jagorar aiki

Aiki panel na SUP jerin yafi kunshi taba taba da kuma iko akwatin.
Taɓa babban shafi, tsari, saiti, saka idanu da sauran allon aiki.

Babban allon aiki na allo

sup-20s (7)

①A cikin wannan allon, zaku iya ganin sigogin tsari na yanzu da bayanin ƙararrawa nan take.

②An kunna Laser kuma hasken mai nuni yana ja idan an kunna shi.

③Makullin aminci yawanci launin toka ne kuma ya zama kore lokacin da kan weld ya taɓa kayan aikin kuma ana iya aiwatar da tsari.

④ An zaɓi yanayin walda, kuma tsoho yana ci gaba.Lokacin da aka saita zuwa tabo walda, zai iya yin haske na ɗan lokaci don aikin waldawar tabo, wanda ke da sauƙin sarrafa lokacin waldawar tabo saboda kuskuren ɗan adam.Ana buƙatar saita wannan aikin kamar yadda ake buƙata ( sigar V3.3 don aikin da ke sama)

Babban allon aiwatar da aiki

sup-20s (8)

①Allon Tsari yana ƙunshe da sigogin tsari don gyarawa, wanda za'a iya canzawa ta danna akwatin.Bayan kun gama gyaggyarawa, danna Ok sannan ku ajiye shi a cikin Saurin Tsari.Don amfani, danna Shigo (gyara - Ajiye - Shigo).
②Yawan saurin dubawa shine 2-6000mm/S kuma nisa na dubawa shine 0^5mm.Gudun dubawa yana iyakance ta faɗin dubawa.Iyakar dangantaka shine.10≤ saurin dubawa/(binciken nisa*2)≤1000 Idan an wuce iyaka, zai zama ƙimar iyaka ta atomatik.Lokacin da aka saita faɗin sikanin zuwa 0, ba za a sami dubawa ba (watau tushen batu) (mafi yawan saurin duba: 300mm/S, nisa 2.5mm).
Ƙarfin kololuwa dole ne ya zama ƙasa da ko daidai da ƙarfin Laser akan shafin siga (misali, idan wutar lantarki ta kasance 1000W, ƙimar ba ta fi girma ba.
1000).
④ Matsakaicin adadin kaya shine 0 ~ 100 (tsoho shine 100, yawanci babu buƙatar canzawa).
Adadin mitar bugun bugun jini da aka ba da shawarar shine 5-5000Hz (tsoho shine 2000, yawanci babu buƙatar canzawa).
Danna maɓallin "Taimako" a saman dama don samun ƙarin bayani game da sigogi masu dacewa.

Maganar tsari (bisa ga ainihin sharuɗɗa, mai zuwa don tunani kawai)

sup-20s (9)
sup-20s (9)

Saita babban allon aiki

Farashin 123456

sup-20s (10)

Ƙarfin laser shine iyakar ƙarfin laser da aka yi amfani da shi.
②Tsarin jinkirin iska shine 200ms ta tsohuwa, kuma kewayon shine 200ms-3000ms.
③Hasken akan hankali yana ƙaruwa daga N1% zuwa 100% na ikon sarrafawa;lokacin da hasken ya kashe, a hankali yana ƙaruwa daga 100% na ikon sarrafawa.
zuwa N2;(kamar yadda aka nuna a cikin hoton da ke ƙasa).

sup-20s (11)

④Rashin jinkirin ciyarwar layin yana da alaƙa da lokacin ciyarwar layin gaba na siginar gani kuma ana iya amfani dashi tare da aikin gyarawa.

⑤ Matsakaicin iyakar ƙararrawar zafin jiki shine 70°C.Lokacin da aka saita ƙimar zuwa 0, ba za a gano ƙararrawar zafin jiki ba.
⑥Scanning gyaran gyare-gyaren kewayon 0.01 ~ 4, madaidaicin layin nisa / faɗin layin aunawa: gabaɗaya 1.25.
⑦ Ƙwararren cibiyar laser shine -3 ~ 3mm, raguwa zuwa hagu kuma yana ƙaruwa zuwa dama.
⑧ siginar matakin ƙararrawa shine tsoho, ana iya canza ƙararrawar garkuwa kai tsaye zuwa gano matakin daidai.
⑨ tsawon lokacin waldawa tabo yana nufin lokacin da ke fitar da haske bayan an ja abin, wato, ko da maballin ya fito, zai ci gaba da haskakawa gwargwadon lokacin da aka kashe (V3.3 version don aikin da ke sama).
Lokaci tazarar walda shine lokacin tsayawar haske tsakanin tabo biyu bayan an ja maɓallin faɗakarwa (Sigar V3.3 na aikin da ke sama)
⑧ Danna maɓallin TAIMAKA a saman dama don samun ƙarin bayani game da sigogin da suka dace.

Sa ido babban dubawa

sup-20s (12)

Wannan haɗin gwiwar yana nuna matsayin kowane siginar ganowa da bayanin na'urar

Danna kan izinin na'urar don shigar da izini lokacin dubawar amfani, bayan shigar da kalmar wucewa, ana iya ba da izinin tsarin don lokacin amfani Hanyoyin ɓoyewa da ɓoyewa iri ɗaya ne:

Hanyar ɓarna tsarin

sup-20s (13)
Wannan shi ne mu classic da zafi mai sayarwa irin na hannu Laser waldi shugaban, mai kyau kwanciyar hankali da kuma low gazawar kudi.


  • Na baya:
  • Na gaba: